Connect the Machine to Wireless Device
Hold down the upper right hand corner of the machine to initiate the admin password box
Enter the admin password. Find or change your admin password here.
Go to 'Equipment Configuration'
Enable the 'Navigation Bar' toggle and submit.
Swipe up on the screen to unlock the interface.
Tap the circle icon, then select Settings → Network & Internet → Wi-Fi -> Disable
Select Ethernet -> Enable (Make Sure IP Address is pulling up the address)
Wait a few seconds for the connection to complete.
Make sure the device has 2 Green lights - LAN and Cellular
Check the connection - Go to 'Browser' -> Type 'Google.com', if you see the Google Search Page, its connected.
Note: The new wireless device has 5 antenna slots. Please make sure you insert the antennas into the correct slots Aux Cell and Main Cell. Refer to the image below for guidance.
